0.96 inch Yellow-Blue OLED Display Module

0.96 inch Yellow/Yellow blue OLED LCD LED Display Module thave Resolution of 128X64 and  Viewing angle greater than 160 degrees. It is compatible  for Arduino

Features:

1. Better quality 
2. The IIC address can be changed, it is convenient to use with different machines.
3. Four square holes are easy to install

Package Includes:

1 x 0.96 inch Yellow/Yellow blue OLED LCD LED Display Module

A seven-segment display (SSD), is a form of an electronic display device for displaying decimal numerals that is an alternative to the more complex dot matrix displays.

The segment is a combination of 7 LED lines or segments. The segments of the display lights in different combinations to display Numbers from 0 to 9, the Arabic Numerals.  The number is displayed by the code or any encoder-decoder IC which gives the command to light LED to make combinations and display numbers.

Features:

1. Type: Common Anode
2. Color: RED
3. Low Current Consumption
4. High Brightness
5. Easy to Use
6. PCB Mounting
7. Black face and white segments
8. It is widely used in digital clocks, electronic meters, basic calculators, and other electronic devices that display numerical information.

Package Includes:

1 x 0.56 inch Red 1 Digit 7 Segment LED Display 10pin

0.96 inch Yellow/Yellow blue OLED LCD LED Display Module thave Resolution of 128X64 and  Viewing angle greater than 160 degrees. It is compatible  for Arduino

Features:

1. Better quality 
2. The IIC address can be changed, it is convenient to use with different machines.
3. Four square holes are easy to install

Package Includes:

1 x 0.96 inch Yellow/Yellow blue OLED LCD LED Display Module

This is a RoHS compliant I2C Serial LCD Daughter board that can be connected to a standard 16×2 or 20×4 Character Display Module that supports 4-bit mode. All Character Modules sold on our site support 4-bit mode, and nearly all commercially available 16×2 and 20×4 line character modules support it too.

This board has a PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display. There are many examples on the internet for using this board with Arduino. Do a search for “Arduino LCD PCF8574“. The I2C address is 0x3F by default, but this can be changed via 3 solder jumpers provided on the board. This allows up to 3 LCD displays to be controlled via a single I2C bus (giving each one it’s own address)

Specifications and Features:

1. 5V power supply.
2. Serial I2C control of LCD display using PCF8574.
3. Backlight can be enabled or disabled via a jumper on the board.
4. Contrast control via a potentiometer.
5. Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
6. Size ：41.6 x 19.2 mm.

Package Includes:

1 x IIC/I2C Serial Interface Adapter Module

A seven-segment display (SSD), is a form of an electronic display device for displaying decimal numerals that is an alternative to the more complex dot matrix displays.

The segment is a combination of 7 LED lines or segments. The segments of the display lights in different combinations to display Numbers from 0 to 9, the Arabic Numerals.  The number is displayed by the code or any encoder-decoder IC which gives the command to light LED to make combinations and display numbers.

Features:

1. Type: Common Cathode
2. Color: RED
3. Low Current Consumption
4. High Brightness
5. Easy to Use
6. PCB Mounting
7. Black face and white segments
8. It is widely used in digital clocks, electronic meters, basic calculators, and other electronic devices that display numerical information.

Package Includes:

1 x 0.56 inch Red 1 Digit 7 Segment LED Display 10pin