It is a 5mm Red DIP LED. An LED is a two-lead semiconductor light source, which emits lights when activated. When an appropriate voltage is applied to the LED terminal, then the electrons are able to recombine with the electron holes within the device and release energy in the form of photons. This effect is known as electroluminescence. The color of the LED is determined by the energy bandgap of the semiconductor.

Features:

1. 5mm Round Water Clear LED Lamp
2. For LED light, indication, illumination
3. Viewing angle: 40 degree
4. UV resistant epoxy
5. With lowest power consumption, long life, and super bright

7414 - 7414 Hex Inverter Schmitt Trigger Datasheet

Photograph

Features

• Six Hex Schmitt Trigger Inverters
• Outputs Directly Interface to CMOS, NMOS and TTL
• Large Operating Voltage Range
• Wide Operating Conditions
• Not Recommended for New Designs

Pin Description

Pin Number	Description
1	A Input Gate 1
2	Y Output Gate 1
3	A Input Gate 2
4	Y Output Gate 2
5	A Input Gate 3
6	Y Output Gate 3
7	Ground
8	Y Output Gate 4
9	A Input Gate 4
10	Y Output Gate 5
11	A Input Gate 5
12	Y Output Gate 6
13	A Input Gate 6
14	Vcc - Positive Supply

Dimensional Drawing

 

Technical Data

Absolute Maximum Ratings

Supply Voltage	7V
Input Voltage	5.5V
Operating Free Air Temperature	0°C to +70°C
Storage Temperature Range	-65°C to +150°C

Recommended Operating Conditions

Symbol	Parameter	Min	Typ	Max	Units
Vcc	Supply Votage	4.75	5	5.25	V
Vih	HIGH Level Input Voltage	2			V
Vil	LOW Level Input Voltage			0.8	V
Ioh	HIGH Level Output Current			-0.4	mA
Iol	LOW Level Output Current			16	mA
Ta	Free Air Operating Temperature	0		70	°C

Electrical Characteristics

Symbol	Parameter	Conditions	Min	Typ	Max	Units
Vi	Input Clamp Voltage	Vcc=Min Ii=-12mA			-1.5	V
Voh	HIGH Level Output Voltage	Vcc=Min Ioh=MAX Vil=MAX	2.4	3.4		V
Vol	LOW Level Output Voltage	Vcc=Min Iol=MAX Vih=MAX		0.2	0.4	V
Ii	Input [email protected] Input Voltage	Vcc=Max Vi=5.5V			1	mA
Iih	HIGH Level Input Current	Vcc=Max Vi=2.4V			40	µA
Iil	LOW Level Input Current	Vcc=Max Vi=0.4V			-1.6	mA
Ios	Short Circuit Output Current	Vcc=Max	-18		-55	mA
Icch	Supply Current with Outputs HIGH	Vcc=Max		4	8	mA
Iccl	Supply Current with Outputs LOW	Vcc=Max		12	22	mA

Switching Characteristics at Vcc=5V,Ta=25°C

Symbol	Parameter	Conditions	Min	Typ	Max	Units
tplh	Propagation Delay Time LOW-to-HIGH Level Output	Cl=15pF Rl=400R			22	nS
tphl	Propagation Delay Time HIGH-to-LOW Level Output	Cl=15pF Rl=400R			15	nS

Do you have battery 9V and need 5Vdc? With this small kit you can connect your battery 9V easily with 9V battery clip and get at the end both 5Vdc & 9Vdc at the same time through a standard pin header 2.54″ connector – Now you can connect to your breadboard directly.

Specifications:

• On/Off switch.
• 7805 Voltage regulator
• 9V Battery clip
• 9Vdc & 5vdc outputs
• Dimensions: 42 x 13 mm

Battery 9v is not included with this kit – you need to buy it separately (check the available options below)

Features

Three 3-Input NAND Gates

Outputs Directly Interface to CMOS, NMOS and TTL

Large Operating Voltage Range

Wide Operating Conditions

Pin Layout

Pin Description

Pin Number	Description
1	A Input Gate 1
2	B Input Gate 1
3	A Input Gate 2
4	B Input Gate 2
5	C Input Gate 2
6	Y Output Gate 2
7	Ground
8	Y Output Gate 3
9	A Input Gate 3
10	B Input Gate 3
11	C Input Gate 3
12	Y Output Gate 1
13	C Input Gate 1
14	Vcc - Positive Supply

Dimensional Drawing

 

Technical Data

Absolute Maximum Ratings

Supply Voltage	7V
Input Voltage	5.5V
Operating Free Air Temperature	0°C to +70°C
Storage Temperature Range	-65°C to +150°C

Recommended Operating Conditions

Symbol	Parameter	Min	Typ	Max	Units
Vcc	Supply Voltage	4.75	5	5.25	V
Vih	HIGH Level Input Voltage	2			V
Vil	LOW Level Input Voltage			0.8	V
Ioh	HIGH Level Output Current			-0.4	mA
Iol	LOW Level Output Current			16	mA
Ta	Free Air Operating Temperature	0		70	°C

Electrical Characteristics

Symbol	Parameter	Conditions	Min	Typ	Max	Units
Vi	Input Clamp Voltage	Vcc=Min Ii=-12mA			-1.5	V
Voh	HIGH Level Output Voltage	Vcc=Min Ioh=MAX Vil=MAX	2.4	3.4		V
Vol	LOW Level Output Voltage	Vcc=Min Iol=MAX Vih=MAX		0.2	0.4	V
Ii	Input [email protected] Input Voltage	Vcc=Max Vi=5.5V			1	mA
Iih	HIGH Level Input Current	Vcc=Max Vi=2.4V			40	µA
Iil	LOW Level Input Current	Vcc=Max Vi=0.4V			-1.6	mA
Ios	Short Circuit Output Current	Vcc=Max	-18		-55	mA
Icch	Supply Current with Outputs HIGH	Vcc=Max		4	8	mA
Iccl	Supply Current with Outputs LOW	Vcc=Max		12	22	mA

Switching Characteristics at Vcc=5V,Ta=25°C

Symbol	Parameter	Conditions	Min	Typ	Max	Units
tplh	Propagation Delay Time LOW-to-HIGH Level Output	Cl=15pF Rl=400R			22	nS
tphl	Propagation Delay Time HIGH-to-LOW Level Output	Cl=15pF Rl=400R			15	nS