720 Magnetic Micro Coreless Motor + 55 MM Propeller for Micro Quadcopters – (Set of 2Pcs)

If you are new in multirotor/drone hobby area and want to try out some basic multirotor designs so as to enhance your basic knowledge about multirotors!!! Don’t wait and get this combo of  720 Magnetic Micro Coreless Motor + 55 MM Propeller for Micro Quadcopters (Set of 2Pcs).

Most importantly this 720 Magnetic Micro Coreless Motor is very compact and lightweight DC motor nicely crafted for perfectly matching with your small 100mm like multirotor frames.

They are 48000 RPM Motors which is more than needed to lift and push your drone to the target. These are less noisy with low resistance. The only drawback of using coreless is the amount of torque they provide, just because they are High Speed and Low Torque motors.

In this pack, we have included high-quality black 55mm propeller compatible with 720, 8520, 615 Coreless Motor.

The propellers are made of high-tenacity material and thus can sustain crashes. Therefore, this propeller with 720 Coreless motors is a perfect combination for your multirotor. Only, Plug-n-Play.

Features :

1. 720 Coreless motor is High Speed and Low Torque motor.
2. Less noisy operation.
3. Offers low resistance.
4. They are equipped with high-quality magnets.
5. This coreless motor supports 1S battery.

Package Includes :

2 x 720 Magnetic Micro Coreless Motor

2 x 55 mm Propeller (Color: Black)

12V DC Solenoid Water Air Valve Switch (Normally Closed) – 1/2″ controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two ½” (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.

The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.

Note:  While Connecting Valve in Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value)

Features:

1. Compact and convenient.
2. Easily installed and serviced
3. Precise and reliable.
4. The installation direction can be arbitrary Angle
5. Pressure-regulating valve (steady flow valve) function similar to the water flow switch
6. Not only can it provide a steady flow, but it also prevents the dry burning.
7. Suitable for fluids like water, oil, air.

Package Includes:

1 x 12V Solenoid Water Air Valve Switch (Normally Closed) – 1/2″

TowerPro Servo Motors are optimum-quality and affordable cost servos.! They are suitable for a wide range of applications, including RC aircraft, automobiles, and robotics, Or just to have some fun with whatever crazy project you’re working on.

When you purchase TowerPro motors in India, they are almost usually NOT ORIGINAL, and these are no exception… These are NOT ORIGINAL Tower Pro Servos, either. However, they are dead cheap and Serve the purpose. We put them to the test and found them to be of good quality for the price.

Wire Description

• Red – Positive
• Brown – Negative
• Orange – Signal

Features:

1. Gear Type: Metal gear
2. Servo Plug: JR (Fits JR and Futaba)
3. Servo arms & screws included, and fit with Futaba servo arm
4. It’s a universal “S” type connector that fits most receivers, including Futaba, JR, Hitec , GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, and Spektrum.
5. CE & RoHS approved
6. We have upgraded our servo gear set and shaft to aluminum 6061-T6. It is stronger and lighter than copper.

Package Includes:

1 x TowerPro MG996R Digital High Torque Servo Motor and Accessories Parts(as shown in the image)

The Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module is; a fully integrated high current H bridge for motor drive applications using the BTS7960 high current half bridge. the BTS7960 is part of the NovalithICTM family. This containing one p-channel high side MOSFET and one n-channel low side MOSFET; with an integrated driver IC in one package. Due to the p-channel high side switch; the need for a charge pump is eliminated thus minimizing EMI.

Interfacing to a microcontroller is made easy by the integrated driver IC which features logic level inputs; diagnosis with current sense, slew rate adjustment; dead time generation and protection against overtemperature, overvoltage, under voltage; overcurrent, and short circuit.
The Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module provides; a cost-optimized solution for protected high current PWM motor drives with very low board space consumption.

Features :

1. PWM capability of up to 25 kHz combined with active freewheeling.
2. Switched mode current limitation for reduced power dissipation in overcurrent.
3. Status flag diagnosis with current sense capability.
4. Overtemperature shut down with latch behavior.
5. Overvoltage lockout.
6. Undervoltage shut down.
7. Driver circuit with logic level inputs.
8. Adjustable slew rates for optimized EMI.
9. 74AHC244 Schmitt-trigger Octal buffer/line driver for ESD protection (Inputs accepts voltages higher than VCC).

Input port:

1. RPWM: forward level or PWM signal input, active high.
2. LPWM: Reverse level or PWM signal input, active high.
3. R_EN: forward drive enable input, high-level enable, low level off.
4. L_EN: Reverse drive enable input, high-level enable, low level off.
5. R_IS: forward drive current alarm output.
6. L_IS: Reverse drive current alarm output.
7. VCC: +5 V power output, 5V power supply connection with the microcontroller.
8. GND: signal common low end.

Package Includes :

1 x Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module.

This servo motor is frequently used in many projects. It moves according to an angle you specify. It comes with its headers and cable. The heads can be attached with the help of small screws.

Specifications:

• Transparent Body
• light body
• low noise level
• Connection Cable 150mm
• Dimensions: 22.6 x 21.8 x 11.4mm
• Working speed (4.8V no load): 0.12seconds / 60 degrees
• Starting torque (4.8V): 1.98 kg/cm
• Operating temperature: - 30 to + 60 degrees
• Dead bandwidth: 4usec
• Working Voltage: 3.5 - 8.4 Volt
• Recommended models: Mini car / Mini ship / Helicopter & Airplane
• Net weight: 13g
• Color: blue 

Scope of application:

• Automatic door
• mini helicopter
• Mini Plane
• Mini Car 
• Mini Ship
• Mini valve control
• robotic arm

Package Included:

• 1x Tower Pro Micro Servo 9g SG90
• 1x Servo head set

This is DIY Mini Wind Turbine Blade Vertical Axis Micro Generator Blades Small Set.

Package includes :

• 1 x Motor With LED light.
• 4 x Vertical Blade.
• 1 x Blade Mounting Head.