No products in the cart.
Atmega328p with bootLoader
Out of stock
225,00 EGP
Out of stock
Add to WishlistAlready In Wishlist
Add to Wishlist
- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
Description
This is a Chinese version of ATmega328P-PU IC which also known as ATmega328P-U. So you may receive IC with printed name ATmega328P-U.
The ATMEGA328P- U is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328P-PU achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.
The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.
The ATmega328P-PU AVR is supported with a full suite of program and system development tools including C Compilers, Macro Assemblers, Program Debugger/Simulators, In-Circuit Emulators, and Evaluation Kits.
Note: The available IC model for this type is ATMEGA328P U.
Features:
High Performance, Low Power Design:
8-Bit Microcontroller Atmel® AVR® advanced RISC architecture
- 131 Instructions most of which are executed in a single clock cycle
- Up to 20 MIPS throughput at 20 MHz
- 32 x 8 working registers
- 2 cycle multiplier
Memory Includes:
- 32KB of programmable FLASH
- 1KB of EEPROM
- 2KB SRAM
- 10,000 Write and Erase Cycles for Flash and 100,000 for EEPROM
- Data retention for 20 years at 85°C and 100 years at 25°C
- Optional bootloader with lock bits
- In System Programming (ISP) by via bootloader
- True Read-While-Write operation
- Programming lock available for software security
I/O and Package:
- 23 programmable I/O lines
- 28 pin PDIP package
Speed Grades:
- 0-4 MHz at 1.8-5.5V
- 0-10 MHz at 2.7-5.5V
- 0-20 MHz at 4.5-5.5V
Low power consumption mode at 1.8V, 1 MHz and 25°C:
- Active Mode: 0.3 mA
- Power-down Mode: 0.1 μA
- Power-save Mode: 0.8 μA (Including 32 kHz RTC)
Package Includes:
1 x ATmega328P-U PDIP-28 Microcontroller
Additional information
| Weight | 0,0000 g |
|---|
Quick Comparison
| Settings | Atmega328p with bootLoader remove | Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) remove | Arduino Uno R3 remove | Ultrasonic holder remove | Raspberry Pi Pico (RP2040) remove | RFID module 13.56 MHz Card Reader MFRC522 Reader/Writer remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Atmega328p with bootLoader remove | Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) remove | Arduino Uno R3 remove | Ultrasonic holder remove | Raspberry Pi Pico (RP2040) remove | RFID module 13.56 MHz Card Reader MFRC522 Reader/Writer remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Image | |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | atmega328p | c2 | UNO-R3 | I123 | RP2040 | RDID-MOD | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | 225,00 EGP | 15,00 EGP | 350,00 EGP | 15,00 EGP | 300,00 EGP | 125,00 EGP | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | Out of stock
| Out of stock
| Out of stock
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | Out of stock | Out of stock | Out of stock | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description |
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content | This is a Chinese version of ATmega328P-PU IC which also known as ATmega328P-U. So you may receive IC with printed name ATmega328P-U.
The ATMEGA328P- U is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328P-PU achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.
The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.
The ATmega328P-PU AVR is supported with a full suite of program and system development tools including C Compilers, Macro Assemblers, Program Debugger/Simulators, In-Circuit Emulators, and Evaluation Kits.
Note: The available IC model for this type is ATMEGA328P U.
Features:High Performance, Low Power Design:8-Bit Microcontroller Atmel® AVR® advanced RISC architecture
Memory Includes:
I/O and Package:
Speed Grades:
Low power consumption mode at 1.8V, 1 MHz and 25°C:
Package Includes:1 x ATmega328P-U PDIP-28 Microcontroller | The Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm Connects speed-critical devices, such as smartphones and peripherals that require a Mini-B connection to your computer. Use this cable to connect your Arduino Board which features a Mini-B USB port to the Laptop/PC. Features :
Package Includes : | Arduino Uno is an ATmega328p based microcontroller board. It includes 14 digital input/output pins (6 of them with pwm output capacity), 6 analog input pins, 16MHz crystal, usb connection, power input, ICSP pins and a reset button. This board contains basically everything a microcontroller should contain.
You can feed the card with the USB connection of the computer or with an external power supply. You do not need to be afraid of making mistakes while working with this card. In case of making any mistake, you can replace the chip on it.
Since it is an original arduino product, it does not need to install any usb driver on the computer.
Technicial Specifications:
| Almost one and half-year before Raspberry Pi Foundation had launched a revolutionary update on their Single Board Computer (SBC) Pi 3 and become the most popular Microcontroller board in the community which is known as a Raspberry Pi 4. On the same timeline, the Raspberry Pi Foundation came with a new astonishing SBC named Raspberry Pi Pico.
The main highlighted thing about RPi Pico is the Lowest cost and Smallest size development board from Raspberry Pi Foundation ever. On the technical side, it is equipped with an RP2040 Microcontroller chip developed by Raspberry Pi Foundation itself. RP2040 is their first dual-core ARM Cortex M0+ processor-based latest small-sized, budget-friendly microcontroller.
The RP2040 is supported with both C/C++ and micro-python, meaning that if you’re a beginner and want to learn any of these languages, the Raspberry Pico would be the best product option to start with.
Features:
For more technical details go through Datasheet in attachmentsPackage Includes:1 x Raspberry Pi Pico | Do you want to know the work of RFID Reader/Writer RC522 SPI S50 CARD AND KEYCHAIN, then this Product is best for you . With this Product, you can detect radio waves produced by a reader to detect the presence of (then read the data stored on) an RFID tag This is RFID Reader/Writer RC522 SPI S50 CARD AND KEYCHAIN which works on non-contact 13.56mhz communication, is designed by NXP as low power consumption, low cost, and compact size read and write chip, is the best choice in the development of smart meters and portable hand-held devices. It uses an advanced modulation system, fully integrated at 13.56MHz with all kinds of positive non-contact communication protocols. Support 14443A compatible answer signal. DSP deals with ISO14443A frames and error correction. This module can fit directly in handheld devices for mass production. The module uses the 3.3V power supply and can communicate directly with any CPU board by connecting through the SPI protocol, which ensures reliable work, good reading distance. Features :
Package Includes1 x RFID-RC522 Reader/Write Module | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | 0.0000 | 0.0000 | 80.0000 | 0.0000 | 0.0000 | 0.0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | 75 × 54 × 12 mm | N/A | N/A | 60 × 39,5 × 5 mm | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Reviews
There are no reviews yet.