Cable For Arduino UNO/MEGA (USB A to B)-50 cm

This is a Cable For Arduino UNO/MEGA (USB A to B) 3.11 feet you can use it to connect “Arduino Uno”, “Arduino Mega 2560″ or any board with the USB female A port of your computer. The cable length is approximately 120cm. Cable color and shape may vary slightly from an image as our stock rotates.

This is a standard-issue USB 2.0 cable. the kind that’s usually used for printers, Arduino, etc. Compatible with most SFE designed USB boards as well as USB Arduino boards like the Uno.

It is very important to understand the cheap USB cables or faulty USB cables may harm your Printers and cause errors again and again while printing important data. For the error-free and long life of your printers, you must use high-quality USB A to B printer cables. We are selling a highly robust and high-quality USB 2.0 Printer cable at a reasonable price.

Connect your USB printer, scanner and more to your computer. Transmits data at high speeds with the error-free, high-performance transmission.

Features :

1. Fully compatible with the PC.
2. Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
3. Aluminum under mold shield helps meet FCC requirements on KMI/RFI interference.
4. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.

Package Includes :

1 x Cable For Arduino UNO/MEGA (USB A to B) 3.11 feet

Do you want to know the work of RFID Reader/Writer RC522 SPI S50 CARD AND KEYCHAIN, then this Product is best for you . With this Product, you can detect radio waves produced by a reader to detect the presence of (then read the data stored on) an RFID tag

This is RFID Reader/Writer RC522 SPI S50 CARD AND KEYCHAIN which works on non-contact 13.56mhz communication, is designed by NXP as low power consumption, low cost, and compact size read and write chip, is the best choice in the development of smart meters and portable hand-held devices.

It uses an advanced modulation system, fully integrated at 13.56MHz with all kinds of positive non-contact communication protocols. Support 14443A compatible answer signal. DSP deals with ISO14443A frames and error correction.

This module can fit directly in handheld devices for mass production. The module uses the 3.3V power supply and can communicate directly with any CPU board by connecting through the SPI protocol, which ensures reliable work, good reading distance.

Features :

1. Highly integrated analog circuitry to demodulate and decode responses.
2. Supports ISO/IEC 14443 A/MIFARE.
3. Typical operating distance in reading/Write mode up to 50 mm.
4. Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd.
5. SPI up to 10 Mbit/s.
6. FIFO buffer handles 64 bytes send and receive.
7. Flexible interrupt modes.
8. Power-down by software mode.
9. Programmable Timer.
10. 2.5 V to 3.3 V power supply.
11. CRC coprocessor.
12. Internal self-test.

Package Includes

1 x RFID-RC522 Reader/Write Module
1 x Standard blank RFID card
2 x A Straight & right-angle header strip
1 x Special-shaped keychain RFID tag

1. The latest Sensor Shield V5 Expansion Board For Arduino is produced by ALSRobot. This Sensor Shield expansion board to retains the advantages of version V4.0 on the basis of stack design, PCB Immersion Gold processing technology. newly added many kinds of interface, for example, IIC interface, 32 channels servo motor interface, Bluetooth communication module interface, SD Card communication module interface and so on, more convenient. Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers and many more directly to your Arduino through this Sensor Shield. Each functional module has buckled port with VCC, GND, and Output, which has the corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking. You can easily connect with usual analog sensors by using this expansion board, such as ray sensor. If you support by this expansion board and the corresponding circuit module, you only need to combine Arduino and sensors module by using special cables, because concrete circuit details achieve by corresponding sensors module, so you only need to consider that how to read data coming from the sensor by the program in Arduino. For Arduino beginners, you do not have a headache for the cumbersome and complex circuit connection, the sensor extends the true sense of the board to simplify the circuit which can easily connect the commonly used sensor, a sensor requires only a common 3P sensor cable (regardless of digital cable and analog cable), after the completion of the circuit connection, the preparation of the corresponding Arduino program downloaded to the Arduino Duemilanove controller reads the sensor data, or receive wireless module to return data after computing the final easy to complete your own interactive works.

   ---

   Features :

   1. Retain the merits of the V4.0 version
   2. Laminated design
   3. PCB immersion gold processing technology
   4. IIC interface
   5. Bluetooth module communication interface
   6. SD card module communication interface
   7. APC220 wireless rf modules communication interface
   8. RB URF v1.1 ultrasonic sensors interface
   9. 12864 LCD string of line and parallel interface
   10. 32 servo controller interface

   ---

   Package Includes :

   1 x Sensor Shield V5 Expansion Board

Arduino Uno is one of the most popular development platforms. Although it is the most widely used among Arduino motherboards, this product is the clone version. 

There are two different versions of the product. In this version, the CH340 IC is used. Another feature is the atmega328 microcontroller with the arduino bootloader installed on this card as SMD. In other clone options, it is possible to remove the microcontroller from the card. However, since this situation increases the cost of the product, the price increases.

Arduino is the most affordable and easy to use model for beginners.

Arduino Uno – R3 SMD model, unlike the original Arduino models, comes with a USB cable as a gift.

R3 is also referred to as REV3. It is the 3rd revision and the most recent revision of the card.

Although there is no difference in working principle, it may require installing a driver for the CH340 IC in order to connect it to your computer on devices under Windows7. Since it is a clone product, it is very advantageous in price.

Features:

• microcontroller ATmega328
• Input Voltage 7-12V
• Number of Digital Pins 14
• Number of PWM Outputs 6
• Number of Analog Inputs 6
• Flash Memory 32k
• Clock Frequency 16MHz

Package Included:

• 1 x Arduino UNO R3 SMD Clone
• 1 x USB cable

The Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm Connects speed-critical devices, such as smartphones and peripherals that require a Mini-B connection to your computer.

Use this cable to connect your Arduino Board which features a Mini-B USB port to the Laptop/PC. 

Features :

• Allows you to connect Arduino Nano V3 with Mini USB port to the computer.
• Up to 480 Mbps data transfer rate.

Package Includes :
1 x Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm

There are two versions of the Pro Mini. One runs at 3.3V and 8 MHz, the other at 5V and 16 MHz. To buy 3.3V/8MHz Pro Mini click on the name below

Pinout Diagram:

Features :

1. ATmega328P running at 16MHz with external resonator (0.5% tolerance)
2. 0.8mm Thin PCB
3. USB connection off board
4. Supports auto-reset
5. 5V regulator
6. Max 150mA output
7. Overcurrent protected
8. Weighs less than 2 grams!
9. DC input 5V up to 12V
10. Onboard Power and Status LEDs
11. Analog Pins: 8
12. Digital I/Os: 14
13. 6 PWM port: D3, D5, D6, D9, D10, D11.
14. Use For Atmel Atmega328P-AU microcontroller.
15. Support serial download.
16. Support 9V battery.

Package Includes :