NANO IO Shield Expansion Board For Arduino Screw Terminals

Features :

1. Compatible with Arduino NANO
2. All digital and analog pins breakout
3. Compact size;
4. Leads all pins out, convenient for wiring and doing experiments.

Mega 2560 is an Arduino board based on ATmega2560. It is one of the most advanced ATmega based Arduinos in terms of processor. It has 54 digital I/O pins. 14 of them can be used as PWM outputs. It has 16 analog inputs, 4 UART (serial ports), 16 MHz crystal oscillator, USB connection, adapter input, ICSP output and a reset button. With the Mega 2560 R3 model, the 16U2 model was used instead of the 8U2 model in the previous versions. In this way, faster data transfer is achieved using less memory. 
It is compatible with all shields designed for Arduino Duemilanove and Diecimila. Thanks to more pins, we can use this advanced processor in many projects such as 3D printers that we cannot do with entry-level Arduinos such as Uno. Arduino Mega 2560 R3 is the latest model of Arduino Mega. It supports all the features found in previous models. 

Arduino Mega 2560 can be powered from USB and an external adapter or battery. The power source is selected automatically. The board can be fed from an external source between 6-20V. If the supply is below 7V, the 5V output pin cannot give 5V and the board may work unbalanced. If an external power source higher than 12V is used, the voltage regulator may overheat and damage the board. It is recommended to use 7-12 Volts.

It is an open source development platform. You can easily program microcontrollers with Arduino libraries. Thanks to its analog and digital inputs, you can process analog and digital data. You can easily design systems that can interact with its environment. You can design systems by processing the received data using sensors. You can make new hardware with the outputs of the systems you designed.

Features:

• Microcontroller ATmega2560
• Operating voltage 5V
• Input Voltage (recommended) 7-12V
• Input Voltage (limit) 6-20V
• Digital I/O Pins 54 (which provide 15 PWM outputs)
• Analog Input Pins 16
• DC Current 20 mA per I/O Pin
• DC Current 50 mA for 3.3V Pin
• Flash Memory 8 KB of which 256 KB is used by the bootloader
• SRAM 8KB
• EEPROM 4KB
• Clock speed 16MHz
• Length 101.52mm
• Width 53.3mm
• Weight 37g 

Package Included:

• 1 x Arduino MEGA 2560 R3 Clone (CH340)
• 1 x USB Programming Cable

Arduino Nano is a small motherboard based on the ATmega328P. It has about the same features as the Arduino Duemilanove, only it lacks a DC power jack. Arduino IDE application is needed 
for programming . The Arduino Nano is powered by the Mini-B USB connection. The power supply automatically selects the high voltage source. The operating voltage is in the range of 5V - 12V. However, the recommended operating voltage should be more than 7V. 9V batteries will be sufficient for operation. 

In this clone version of Arduino Nano board, CH340 IC is used instead of Standard FTDI or 16U2 chips. 
Thus, the cost was reduced, but there was no change in performance.  

Features:

• Micro-Controller: ATmega328P
• Operating Voltage: 5V
• Input Voltage (recommended): 7-12V
• Digital I/O Pins: 14 (6 of them to provide PWM output)
• Analog Input Pins: 8
• Flash Memory : 32 KB
• Operating Frequency: 16 MHz
• Dimensions : 19x43mm

Package Included:

• 1 x Arduino Nano Clone CH340
• 1 x USB C Cable

1. The latest Sensor Shield V5 Expansion Board For Arduino is produced by ALSRobot. This Sensor Shield expansion board to retains the advantages of version V4.0 on the basis of stack design, PCB Immersion Gold processing technology. newly added many kinds of interface, for example, IIC interface, 32 channels servo motor interface, Bluetooth communication module interface, SD Card communication module interface and so on, more convenient. Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers and many more directly to your Arduino through this Sensor Shield. Each functional module has buckled port with VCC, GND, and Output, which has the corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking. You can easily connect with usual analog sensors by using this expansion board, such as ray sensor. If you support by this expansion board and the corresponding circuit module, you only need to combine Arduino and sensors module by using special cables, because concrete circuit details achieve by corresponding sensors module, so you only need to consider that how to read data coming from the sensor by the program in Arduino. For Arduino beginners, you do not have a headache for the cumbersome and complex circuit connection, the sensor extends the true sense of the board to simplify the circuit which can easily connect the commonly used sensor, a sensor requires only a common 3P sensor cable (regardless of digital cable and analog cable), after the completion of the circuit connection, the preparation of the corresponding Arduino program downloaded to the Arduino Duemilanove controller reads the sensor data, or receive wireless module to return data after computing the final easy to complete your own interactive works.

   ---

   Features :

   1. Retain the merits of the V4.0 version
   2. Laminated design
   3. PCB immersion gold processing technology
   4. IIC interface
   5. Bluetooth module communication interface
   6. SD card module communication interface
   7. APC220 wireless rf modules communication interface
   8. RB URF v1.1 ultrasonic sensors interface
   9. 12864 LCD string of line and parallel interface
   10. 32 servo controller interface

   ---

   Package Includes :

   1 x Sensor Shield V5 Expansion Board

Features:

Package Includes:

There are two versions of the Pro Mini. One runs at 3.3V and 8 MHz, the other at 5V and 16 MHz. To buy 3.3V/8MHz Pro Mini click on the name below

Pinout Diagram:

Features :

1. ATmega328P running at 16MHz with external resonator (0.5% tolerance)
2. 0.8mm Thin PCB
3. USB connection off board
4. Supports auto-reset
5. 5V regulator
6. Max 150mA output
7. Overcurrent protected
8. Weighs less than 2 grams!
9. DC input 5V up to 12V
10. Onboard Power and Status LEDs
11. Analog Pins: 8
12. Digital I/Os: 14
13. 6 PWM port: D3, D5, D6, D9, D10, D11.
14. Use For Atmel Atmega328P-AU microcontroller.
15. Support serial download.
16. Support 9V battery.

Package Includes :